Procedure 程序Configuring NIC Teaming for OS Elemental为操作系统 Elemental 配置 NIC 分组Overview 概述This article provides the procedure for configuringNIC Teaming (bonding)inSUSE Elemental OS. It includes an example configuration that can be adjusted to suit your specific environment.本文提供了在SUSE Elemental OS中配置NIC 分组绑定的流程。它包含一个示例配置可以根据你的具体环境进行调整。Note:This procedure demonstrates the configuration usingElemental (the visual method)via the Rancher UI. Alternatively,Elemental (the command-line method)can be used to achieve the same result.注该过程通过 Rancher 界面演示了Elemental可视化方法的配置。或者也可以使用Elemental命令行方法来实现相同的结果。Prerequisites 前提条件Access toRancher UIwith appropriate administrative privileges.拥有适当的管理权限即可访问Rancher UI。Network interfaces available for bonding (e.g.,eth0,eth1).可用于绑定的网络接口例如eth0、eth1。Familiarity withNetworkManagerandcloud-configsyntax.熟悉NetworkManager和云配置语法。Procedure 程序Step 1: Create or Update a Machine Registration Endpoint步骤1创建或更新机器注册端点In theRancher UI, navigate to:在Rancher 界面中导航到☰ OS Management Registration Endpoints.☰ OS Management 注册端点。ClickCreateorEdit Config.点击创建或编辑配置。In theCloud Configurationsection, add or update the following configuration example.在云配置部分添加或更新以下配置示例。Example Cloud Configuration云配置示例span stylecolor:#000000span stylebackground-color:#ffffffcode classlanguage-yaml /code/span/spanspan stylecolor:#000000span stylebackground-color:#ffffffspan stylebackground-color:#efefefcodespec: config: cloud-config: stages: initramfs: - files: - content: | [connection] idbond0-slave-eth0 typeethernet interface-nameeth0 masterbond0 slave-typebond autoconnecttrue [ethernet] mac-address00:50:56:bd:c3:f8 path: /etc/NetworkManager/system-connections/bond0-slave-eth0.nmconnection permissions: 384 - files: - content: | [connection] idbond0-slave-eth1 typeethernet interface-nameeth1 masterbond0 slave-typebond autoconnecttrue [ethernet] mac-address00:50:56:bd:01:a2 path: /etc/NetworkManager/system-connections/bond0-slave-eth1.nmconnection permissions: 384 - files: - content: | [connection] idbond-bond0 typebond interface-namebond0 [bond] miimon100 mode802.3ad xmit_hash_policylayer34 [ipv4] methodauto dns10.144.53.53;10.144.53.54 [ipv6] methoddisabled path: /etc/NetworkManager/system-connections/bond-bond0.nmconnection permissions: 384 /code/span/span/spanVLAN Configuration (Optional)VLAN 配置可选To configure the bonding interface to use a specific VLAN, use the following example instead of the standard bond configuration:要配置绑定接口以使用特定的 VLAN请使用以下示例代替标准绑定配置span stylecolor:#000000span stylebackground-color:#ffffffspan stylebackground-color:#efefefcode- files: - content: | [connection] idbond-bond0 typebond interface-namebond-bond0 mastermgmt-br slave-typebridge autoconnecttrue [bond] miimon1000 mode802.3ad xmit_hash_policylayer34 [ipv4] methoddisabled [ipv6] methoddisabled path: /etc/NetworkManager/system-connections/bond-bond0.nmconnection permissions: 384 - files: - content: | [connection] idbond-bond0.1234 typevlan interface-namebond-bond0.1234 autoconnecttrue [vlan] id1234 parentbond-bond0 [ipv4] methodauto [ipv6] methodauto path: /etc/NetworkManager/system-connections/bond-bond0.1234.nmconnection permissions: 384/code/span/span/spanspan stylecolor:#000000span stylebackground-color:#ffffffcode classlanguage-yaml /code/span/spanAdditional Information 附加信息File permissions mustrestrict read and write access to the root useronly.文件权限必须限制只对根用户进行读写访问。NetworkManager will refuse to load any connection profile with incorrect permissions.NetworkManager 会拒绝加载任何权限错误的连接配置文件。Use octal notation to specify file permissions.使用八进制符号来指定文件权限。For example: 例如rootSUSE-820564:~# echo $((0600)) 384 rootSUSE-820564:~#rootSUSE-820564~# echo $0600 384 rootSUSE-820564~#Refer to the official documentation for additional details:更多细节请参阅官方文档Static Network with NetworkManager Configurator与 NetworkManager Configurator 的静态网络Summary 摘要By following this procedure, you can successfully configure NIC teaming in OS Elemental using either the visual method (Rancher UI) or the command-line method. Adjust the sample configuration as needed for your environment, ensuring all permissions and parameters align with your network requirements.按照这个步骤你可以在 OS Elemental 中通过可视化方法Rancher UI或命令行方法成功配置网卡分组。根据您的环境需要调整示例配置确保所有权限和参数都符合您的网络需求。Environment 环境Rancher 2.9 牧场主 2.9 Elemental Operator 1.6 and 1.7元素操作员 1.6 和 1.7访问Rancher-K8S解决方案博主企业合作伙伴 https://blog.csdn.net/lidw2009